MagiColor Permanent Hair Color (6) Dark Blonde 100ml

Product Information

The terms ZPL emulation, ZGL and ZGL (Zebra ZPL emulation) refer to emulated versions of the Zebra Programming Language from Zebra Technologies. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the ZPL data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).

The terms Adobe PostScript 2 and Adobe PostScript 3 refer to versions or levels of the Adobe PostScript printer language. PostScript was developed by Adobe, but is used by a number of other printer manufacturers, though typically in laser printers. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File. Note: Configuring a PC5250 printer session without Host Print Transform (HPT) and without a Printer Definition Table (PDT) file is most likely to print successfully. However, you will not be able to print *AFPDS spooled files because that requires using Host Print Transform, and you will have limited control over the formatting of your output (including limited control over the font selection). Therefore, configuring to print to a Host-Based Printing, Proprietary (GDI), or Windows GDI printer is considered unsupported, as would printing to any other host-based printer. Prevent hair damaged from harsh chemical, a line of products that combine the best between nature and science. Maximum respect to your hair and scalpThe terms RPCS and Ricoh RPCS refer to the Refined Printing Command Stream (RPCS) printer language from Ricoh. This printer language is a Microsoft®Windows®-optimized printer data language. Therefore, printers that use this printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file.

If IPP is set to Y, then the printer model should work with a *LAN 3812 IPP device description, which communicates with the printer and print server using the Internet Print Protocol (IPP). The term Epson ESC/P2 refers to the ESC/P2 printer data stream. ESC/P2 was developed by Epson, but is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers.Or, create a printer configuration and see if it works. Most PCL printers use port 9100 and regardless of the hardware, a PCL Manufacturer Type and Model, such as *HP4, *HP5SI, *HP4000, etc. will work. Most printers that support LPD will accept communication over port 515 regardless of whether the correct remote printer queue value is used. The MFRTYPMDL for HPT column lists the Manufacturer Type and Model (MFRTYPMDL) setting that can be used with Host Print Transform (HPT) to select the appropriate data stream for that printer. This can apply to use with a PC5250 printer session as well as a Remote Output Queue, a *LAN 3812 PJL device description, a *LAN 3812 SNMP device description, or a *LAN 3812 IPP device description. Original Windows Server 2016 driver will function properly, however if WSD is used to install your device, device information cannot be acquired. Printers are listed in this document because they are known to exist; therefore, being listed is not a statement that the printer model is supported.

The terms ZPL and ZPL II refer to different versions of the Zebra Programming Language from Zebra Technologies. These printer languages are not supported by Host Print Transform (HPT), but HPT should pass the ZPL and ZPL II data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST). This document contains information on the capabilities that are supported on the printer hardware. It also indicates whether each printer model is likely to work when printing from a System i using LPR, PJL, SNMP, IPP, or a PC5250 printer session. If Host-Based is set to Y, or MFRTYPMDL for HPT and PDT File for PC5250 are set to n/a, then that printer model probably will not work with Host Print Transform (HPT) or a Printer Definition Table (PDT) file; therefore, it will be limited in how well it works with the System i. You will probably need to configure a PC5250 or third-party printer session without using HPT and without using a PDT file. This type of configuration is not able to print *AFPDS spooled files, and it has limited control over the formatting (which includes the font that is used).

Printerland cannot match the price where a manufacturer or distributor sells directly to the public N1019586: Configuring a *LAN 3812 Device Description that Uses the LPR Print Driver (TSPLPRD) Exit Program The IPP column shows whether a *LAN 3812 IPP device description can be used to print to this printer when directly connected to the LAN, WAN or Internet. The term IPP refers to the Internet Print Protocol. IPP allows for two-way communication with the printer when attached to the LAN using a print server that also supports IPP. Support for the IPP Print Driver is available in the base code for R520 OS/400. Where special offers provided by Printerland and/or the manufacturer applies, the competitor must also be providing the same offer/s for the A *LAN 3812 SNMP device description can be used to print to this printer when directly connected to the LAN, provided the print server supports SNMP.