Gyproc Plasterboard Patches various sizes 12 Pack (2 x 50mm, 5 x 100mm & 5 x 150mm))

Product Information

Once the patch is dry and firmly in position, gently remove the screw. Use patching plaster, all purpose filler or multi-finish plaster — mix up enough to cover the patch and gently press into the hole and spread with a putty knife that is larger than the hole to help get a smooth finish. Holes like these are awkward to fix because there’s often a void behind the board so any filler you put in just disappears. This hole came about when a plumber couldn’t decide where to feed the pipes for a radiator. But fixing holes in plasterboard can be achieved easily…

The first thing to do is to cut out a rectangle around the hole using a steel rule and a Stanley knife. Alternatively, mark out with a pencil and ruler and cut out with a jab saw.Storage & Home Clearance Furniture Clearance Garden & Outdoor Clearance Lighting Clearance Electrical Clearance Tools Clearance Paint & Decorating Clearance Flooring & Tiling Clearance Building & Hardware Clearance Bathrooms & Plumbing Clearance Kitchens Clearance Once dry, you can gently rub down the plaster or filler, and then paint the repaired area to match the surrounding wall. How to Fill Large Holes in Plasterboard Apply the filler by working it into the holes of the patch and towards the edge. Feather out at least 50mm beyond the edges of the patch to create a smooth, seamless finish. Leave to set for a minimum 30 minutes.

Anybody Can Use It - Apply the plasterboard repair patch kit to your wall or ceiling. Once the mesh has bonded, cover over with plaster and smooth out with a scraper. You can then decorate the wall as preferred to make it look like new. Artex Caulker (250mm ) helps to fill joints and create smooth finishes or any suitable jointing knife Time saving and mess free compared to traditional methods of filing a hole with newspaper and building up layers with filing compoundRead on to find out how to repair holes in plasterboard with the Gyproc EasiPatch Plasterboard Patch. As you will need to do a bit of cutting, before you start this, firstly run over the area around the hole with a wire detector to make sure there aren’t any wires, pipes or other items that you may accidentally cut through. Measure and cut a new piece of plasterboard to fill the hole. Fix in place with plasterboard screws or nails. Mix up plaster, apply and leave to dry. Gyproc EasiPatch Plasterboard Patches are coming soon (Available April 2022). The must-have repair solution for damaged plaster and plasterboard is now available in